
November 20, 2026 · 4 min
CNG tank inspection: vehicle fuel cylinders with an expiration date
Compressed natural gas cylinders on vehicles are built to a service life, labeled with an expiration date, and inspected at intervals set by the label and the manufacturer.
A CNG tank is a high pressure cylinder that stores natural gas as vehicle fuel, on buses, refuse trucks, delivery fleets and converted cars and pickups. It is not a storage tank in the sense used on the rest of this site, and it is not inspected the way a propane cylinder is. It belongs to its own category, with its own construction standard, its own label and its own inspection rules.
Four types of cylinder
CNG cylinders are built in four types: all steel, steel or aluminum with a hoop wrap of composite, a metal liner fully wrapped in composite, and a plastic liner fully wrapped. The type matters for inspection, because composite damage is judged differently from damage to steel. Cylinders for vehicles in North America are generally built to the ANSI NGV 2 standard, and the label on each cylinder states the standard, the manufacturer, the service pressure and the expiration date.
The expiration date is final
Unlike portable propane or CO2 cylinders, vehicle CNG cylinders are not requalified to extend their life. They are designed for a service life, and when the date on the label is reached the cylinder is removed from service and destroyed so that it cannot be reused. A fleet manager who does not track these dates can find a vehicle carrying an expired cylinder, which is a serious finding in any inspection.
Periodic visual inspection
Between installation and expiration, cylinders are inspected visually at intervals stated on the label and in the manufacturer’s instructions, and after any fire or collision. The inspection is done by a person trained for it, following the industry guidance for CNG fuel system inspection. It looks at the cylinder surface, the brackets and straps, the pressure relief devices, the valves and the fuel lines.
What disqualifies a cylinder
Cuts, gouges and abrasion in the composite beyond the limits in the manufacturer’s criteria, impact damage, heat or fire damage, chemical attack, corrosion on metal parts, loose or damaged mounting, and a missing or illegible label. A cylinder without a readable label cannot be shown to be within its life, and is condemned. Damaged cylinders are not repaired.
Why the brackets and shields matter
Many cylinder failures start not in the cylinder but in what holds it: a strap rubbing through the composite, a shield trapping road salt and water against the cylinder, a rubber insulator that has fallen out. Inspection gives as much attention to the mounting as to the cylinder, and so should anyone who works on the vehicle.
Fueling stations are a separate subject
The ground storage at a CNG fueling station, compressors and storage vessels, is a fixed installation under different codes and inspected differently from the cylinders on vehicles. The general sorting of which tank answers to which rule is in who inspects what, and the pressure vessel logic shared with compressor receivers is in air compressor tank inspection.
Records for a fleet
For each vehicle: the cylinders installed with their serial numbers and expiration dates, the date and result of each inspection, and any event that should trigger an extra inspection. A list sorted by expiration date tells a fleet manager which vehicles will need cylinders replaced, years before the date arrives. That is the same discipline described on inspection planning.
The same list helps when vehicles are bought or sold. A used CNG vehicle comes with cylinders whose remaining life is part of its value, and the label is the only place that life is written. A buyer who reads the expiration dates before agreeing on a price knows whether the cylinders will need replacing soon. A seller who keeps the inspection records shows that the fuel system has been looked after, which no amount of cleaning on the outside of a cylinder can prove.
Not sure which rules apply to your tank?
Describe the tank, what it holds and why the question came up. Four questions, then a call.
Free and with no obligation: we call you back to confirm the details, then, with your OK, your request goes to one certified inspector who covers your area and follows up with a quote.